David's Frame Part 2 Front Triangle and Chain Stays

David's Frame - Part 1 Mitering and Tacking

Just a few pics of putting together the fork and frame for David's Knardtastic 3point0 29er Frostline Icebreaker

Fat bike? Not necessarily. Big, yes. Very big.

Raliegh Repair Pics

 This beautiful Raleigh Team USA frame came in with both seat stays cracked at the the cap.

There wasn't any separation or other damage so we opted for a simple crack repair operation.

 I started by filing a ridge into the crack to see how bad it was, and to prep it for taking new metal.

 Then I roughed up the weld area and removed paint from the heat zone.

Then the other side.

Next, I ran a bead on both sides, digging in to not only repair the crack, but also to add a little extra metal, is it would now be a weak point in the structure.

Finally, I finished it off by carefully sanding it to shape and polishing it.

Unfortunately, I couldn't re-stamp the letters!

This type of repair should last a good while under normal conditions and usage, and it comes with a discounted cap replacement if it doesn't hold up.

The bike is a bold solid red Team USA, but my camera setting made it look pink..!

Cheers!

Painted Frame Pics: Maiden Voyage and Dancer

The Maiden Voyage BB Shell

The Maiden Voyage

The Maiden Voyage

The Maiden Voyage Rear Dropouts

The Maiden Voyage 52cm Adventure Frame & Forks Pre-Decals

Dancer with wheels

Dancer Rear Dropout

Dancer Frame

Dancer Front Frame

Dancer 46cm Urban Track Frame for Jamison

Much thanks to AP Paints!!

Frames back from the painter & starting David's 29er

Jamison's single speed frame (Dancer) and Trailer, ads well as my touring/CX/commuter (Maiden Voyage) are back from the painter. I'm really stoked on these as they look great and I'll post some pics after I get the decals sorted out.

Also, I've drawn out David's 29er frame, an over sized compact 29er built for Knard 3.0's with room for fenders, setup for hydraulic disc brakes and racks.

May Day Cafe Bike Racks

Pics of the May Day Bike Racks in action. They are fabricated from 14 gauge 1" square steel tubing with 6mm thick hardened plate steel mounts TIG welded into place, drill out for two 3/8" concrete anchor bolts in each foot. Aesthetically, I went for a simple coffee mug shaped theme and a black/clear powder coat. These look great, and should hold up for a good while. Depending on how well they are treated, they shouldn't even need touch up or maintenance for years!

Jamison's Framebuild #2: It's a bike!

 Ah, the weather outside is delightful, and Jam's frame is coming to fruition...














Finished the brake mounts and crown race ring today, slotted the seat tube, and did the final alignment. Next shots will be with paint!