Showing posts with label 29er. Show all posts
Showing posts with label 29er. Show all posts

Friday, September 18, 2015

Building the Black Ship Monster X Cross with Campy Athena EPS

Oh bother. This post was started months ago and got erased in the cyber-nethers. Let's crack a beer and see what happens:

Unassuming pile of Chromoly tubing
Monster X Cross
 (Or how to turn an unassuming pile of chromoly tubing into a sweet ride)

Design and Drafting: David and I collaborated on the design for this one. As an avid rider and owner of many custom bikes, he could tell me exactly what he wanted out of  the frame. in this case, fast, aggressive but still comfy position in drop bars with Campy Athena EPS.

After drafting the soon to be frame, the appropriate tube set is ordered. in this case, Nova Cycles made a custom Monster Cross kit for Black Ship Cycles that used lighter 29er tubing with the same rear triangle as the Icebreaker.

Part 1 - Cutting, Fitting, Welding: Once the tubing showed up, the cutting and filing began. Rough cutting main tubes began with a chop saw, then mitered with bi-metal hole saws in the vertical mill. Once the tubes were notched, I perfected the fitting by hand filing and cleaning the joint. This was also a good time to drill out the enlarged bottom bracket holes to accommodate the electronic shifting wiring.
We marked all of our spots for the EPS wiring and drilled them out, then cleaned'em up with a hand file. This took a while, as neither one of us was very familiar with the group, but we found all the info we needed and it was a rewarding accomplishment to put a sweet custom spin on this bike.

As soon as everything fit up properly and snug in the fixture, the front triangle is tack welded into place in sequence.

The piece then comes out of the fixture and onto the table for the finish welding, also done in sequence to prevent heat warpage and misalignment.

Once the front triangle is check on the alignment table, the rear triangle gets cut and fit, same as the front. The tubes are slotted for dropouts using a rotary cutting wheel and hand file, then the dropouts are inserted and aligned. Everything is tacked in the frame then welded in sequence on the table. The frame is then checked for alignment and clearance.

The next step is to cut, fit, and weld in the fender mounts. After that, the brazing will begin.














Part 2 - Brazing, Finishing: First, all of the brazed on small parts get dry fit and marked on the frame with sharpie. Holes are drilled for threaded mounts and other mounts are filed to match the curve of the tube. Once they are all set up and clean, each piece is clamped, fluxed, and brazed into place with either silver or bronze using an oxy/acetylene torch. The flux is cleaned of and all braze-ons are thoroughly checked, any adjustements are made.

Finally, the seat tube is notched and reamed, any inconsistencies are filed down, then the final alignment and quality check is done. Once everything passes inspection, it's off to the paint shop! 









The Monster X Cross!








Friday, January 16, 2015

ICEBREAKER with 26" x 2.25 tires

I finally got this build put together!

I'll post a demo of the dog leash loop asap.
Morgan (our aussie-collie) loves riding through the snow! The bottom bracket is high enough that I can still pedal with him through 3-4" of soft white fluff, and plow right through snow banks.




Right now it is a frankenstein of parts from my shop and the salvage yard at the HUB Bike Coop.
1x9, SRAM X5 Der, GXP BB, Tektro Lyra discs w/V-Brake levers, 26" Bontrager Disc Wheels, 2.25" Bontrager Jones XC Tires.

So fast, so sweet...

Friday, November 14, 2014

David's 29er+ #2: How to Build a Full Custom Oversized Plus Frameset in Four Days

How to Build a Bike in 4 Days:
This was the second, and final, attempt at nailing down a the perfect frame with David's custom geometry and 3.0 Knards. It was a big (sic) challenge, but given the outcome of the last frame (BB too high and TT too short) and I had my reservations on the final product. Alas, I actually had the privileged to ride it yesterday, and it feels perfect. David commented that it rode so smooth on the road that it felt like a road bike. That was the idea! I'm stoked.

Since the first frame was off (it will actually fit me perfect 26" winter tires, more later...) I had to push to get this into the painter s soon as possible. With the last of the parts coming in on Thursday and the painter scheduled for Monday, that meant 4 days to put the whole thing together, start to finish.

Day 1: Pulled out the drawing sheet and rough cut all the tubes. Laid out the master drawing and
mitered the main triangle, with the help of the new tube notching clamp I picked up on sale. I also mitered out the chain stays and fork blades, mostly by hand, with a little help from the mill. Once everything fit together properly, I tacked it in the jig and welded most of the front triangle and fork.

Day 2: Worked on the rear Triangle, cutting, mitering, tacking, checking, and welding it all together. Given the complex geometry from the oversized tires and spacing, this took lots of measuring three times and mocking up tire clearances and spacing. But, It turned out great!


Day 3: Finished welding the fork joints,
and disc tab. Mitered bridges,
created the custom dog leash loop,
welded them in, then marked and cut all of the braze-ons.

Day 4: Brazed in all of the accessories; front and rear rack, fender, bottle and cable mounts, cleaned up the joints, and checked final alignment. All within tolerance. Tapped in the serial number. DONE!

Tuesday, November 4, 2014

November Sale! 26/27.5/29er+ Frameset Sale! $1000 w/ Paint!

Made with the

ZONA OS MTB TUBESET with Slider Disc Dropouts

Frame options:
frame size options: 46-60cm frame
tire size options: 26x2-3", 27.5x2-3", 29x2-3"
bottom bracket options: 68mm or 73mm

custom fitting & geometry
to match your body and riding style
& custom powdercoat
only $1000!!

to set up a fitting and designing appointment
email blackshipcycles at gmail dot com

order must be placed by or on December 3rd
to get this low pricing passed on from



nova cycle supply

Monday, October 13, 2014

29er+ Frame Set for Sale! - $800



This frame is super light, hand built right here in beautiful Minneapolis with Columbus Aero Tubing and made to tightly fit a maximum tire size of 3.0 Knards. It could easily handle 26x2.+ or 650bx2.5 with clearance for fenders, mounts for front and rear racks, and would make a great winter bike/commuter. It is designed for a tall (6ft) rider. It is comparable to a Marin Muirwoods 29er, but sits up higher (with bigger tires on it). 4130 Chromoly steel with Matte 'midnight black' powder coat finish. Even has a custom dog leash tie bracket!

If you are interested in a big and light oversize tire bike, please email me before it gets nabbed!! $800 o.b.o. See geometry below:







 Geometry (with Knard 3.0s) in mm:

Seat Tube Length 571.5



Top Tube Length
(Center-Center)
591.5



  Effective Top Tube Length     
(Center-Center)
604



Head Tube Angle 71



Seat Tube Angle 73.5



BB Drop 35



Chainstay Length 450



Wheelbase 1090



Standover Height 855



Head Tube Length 120



Fork Length 460





                             Fork Rake                  45